Satisfaction is a bobbin of plied yarn

I love the final plying process when spinning yarn. This is Texel and Clun Forest wool fibre, processed from raw fleece. One single of each as an experiment.

I find it very difficult to get a smooth yarn from my own prepared raw fleece. It’s pretty easy from commercially prepared tops, but getting all those little nepps and second cuts out is pretty impossible for me.

I’ll wash this and see how it comes out.

Wild Chalk: a celebration of the natural world of the South Downs

The South Downs are home to the Southdown breed of of sheep, the wool from which can be used for hand spinning. So to support the local Shout Downs national park and sheep farmers I joined several other members of my local spinning group, Woolly Umbrella, and took my skills (basic as they are) along to Wild Chalk. This free event, organised by the South Down National Park Rangers, was held in East Brighton park. Our part was to demonstrate spinning wool and encouraged people to have a go. I took along several drop spindles and a sack of washed fleece. Others brought along a spinning wheel, drop spindles and needle felting to share, plus an exhibition with some beautiful examples of naturally dyed, handspun wool. Most people were spinning the local Southdown fibre but mine, to my shame, was Texel cross Southdown.

As you can see children and adults alike really loved to watch, and most of them tried spinning from fleece to some extent or other.

I practised with a newly acquired Turkish spindle and using the Andean Plying technique even produced some reasonable 2ply.

Spinning wheel drive ratio – getting down to the nitty gritty, and learning to control my tendency to over-spin yarn

Spinning wheel drive ratio is the number of times the bobbin revolves whilst the drive wheel makes one revolution. It is governed by the size of the whorl that drives the bobbin. There is of course the effect of any brake to be considered as well, but this has to be adjusted to get the yarn to wind onto the bobbin and is not the same as the drive ratio.

Most modern wheels offer different ratios by providing several different sized whorls on the bobbin or flyer. Probably because my upright double drive is an old wheel, and I mean old, wobbly and fragile – one that would be termed ‘vintage’ on eBay, it only has one ratio (it only has one whorl on the bobbin). I tend to over-spin when using this wheel, so I wanted to teach myself to make softer yarn and thought understanding drive ratio might help me. Being a bit techie and liking to understand how things work, I decided as a first step to check out what the drive ratio is on my upright double drive wheel.

Using advice from ‘Spinning Wool – beyond the basics’ by Anne Field, I started the process. Firstly I removed any yarn from the orifice and bobbin and slackened the tension screw to the lowest setting. Next I tied a tag of yarn on one arm of the flyer as a marker, and aligned this arm with the rear maiden. Now, using my hand I turned the wheel one complete revolution, counting how many times the tag of yarn passed the rear maiden. This figure is the drive ratio of the wheel as it is set up (remember that a different sized whorl will give a different ratio). In this example, the bobbin revolved 6 times during one revolution of the drive wheel, which means that my old double drive upright wheel has a 6:1 ratio.

Next in my experiment to spin softer yarn I trawled further advice from Anne Field. She suggests that the fibre itself can give you information as to how to spin it, and that frequency of crimps along the staple length of fibre can give you a clue about how the twist frequency. In her opinion a fibre with 7 crimps in 2.5cm, for example, is best spun with 7 twists per 2.5cm of singles. OK, I thought, so I pulled a staple from the Shetland fleece I am working with, and counted the crimps per 2.5cm. I used a magnifying glass to help me, and came out with a figure of 5 crimps in 2.5cm, which meant that I needed to aim for 5 twists in every 2.5cm of singles as I spun the fibre.

Once again I referred to Field’s book, and from the suggested methods for establishing a visual reference for the distance in which the twists should lie, I chose to mark 2.5cm on a piece of paper. I then taped this my lap whilst spinning. Other methods included marking these lines in your spinning apron, or using points on your fingers, e.g. tip of thumb to knuckle. This last one is the one I plan to move to once I am a bit more confident.

To re-cap, my aim, based on the Shetland fibre’s crimp, was to have 5 twists in 2.5cm of yarn. This meant 2.5cm of twisted yarn had to be drawn onto the wheel during one revolution of the drive wheel (5 revolutions of the bobbin), thus 5 twists would be inserted into that set length of yarn.

Anne Field estimates that approximately 1 twist will be lost in each 2.5cm of singles once the yarn is plied (although I am a bit hazy about how that happens), and so it seemed to me that I could spin the yarn with 6 twists per 2.5cm and finish with the 5 twists I wanted. This fitted in really neatly with the wheel’s drive ratio of 6:1, (1 treadle, and therefore 1 revolution of the wheel, turns the bobbin 6 times). This made me wonder whether this wheel was designed and made for spinning this type of wool from the older British breeds.

So by treading SLOWLY, drafting 2.5cm of fibre and releasing 2.5cm of yarn into the bobbin for each revolution of the drive wheel (one pedal motion), I actually managed to make a start.

To check how I was doing I stopped after a few metres of singles, pulled some back off the bobbin and let the yarn twist back on itself to emulate the final plied yarn. After evaluating the twist, and adjusting my spinning accordingly, I eventually managed to achieve approximately 5 twists per 2.5cm! Yes….I was getting it – slowly.

The resulting yarn is so much softer and fuller than my normal attempts – and a small hank is now drying in the bathroom for me to evaluate tomorrow.

My next step is to lengthen the draft and feed 5cm of yarn onto the bobbin in 2 treadles (revolution s of the drive wheel). In theory I can increase the length of draft and feed depending on the length of fibre I am working with, providing it has 5 crimps per 2.5cm.

I’m not sure what happens if there is more or less crimp, and therefore more or less twist required in 2.5cm. That is my next learning curve.

I may I have made some mistakes and probably over generalised, so welcome comments and advice.


Brighton Textile Art Group meeting 11th May

Well I did it, I made it along to the meeting today and joined the group. Thank you to all the kind members who made me feel so welcomed. There was a natural dyeing workshop today, but of course I had not booked in advance. However, I took some singles spun on my Spurtzler and plied this using my hands in an Andean ply. Then I had two little hanks to dye in the onion skin and the daffodil dye baths.

Click on the photo to visit the brighton Textile Art Group website and see what other events and workshops are in the future.

There is a little more detail of the day on my Natural Dyeing page.

Spinning days

Last week I hosted a ‘learn to spin’ afternoon. We had drop spindles and two wheels. Because no-one had spun before I started with lengths of commercial my sun yarn – about 12 metres each. These were used to learn the basics of working the spindle and twist direction.

After everyone was feeling more confident, fibre was introduced. This was lightly scoured Jacobs fleece with a little oil left to make it easier to spin.

Strengthened by team and home made oat biscuits we progressed to the wheels.

The Ashford single drive, double treadle Traveller was the most popular. But even that took some easing into.

Everyone got some yarn made.

We plan another soon.

Notes on spinning and plying

Spinning 

Spinning is twisting fibres together to make a single spun yarn (singles). All sorts of fibres can be spun, but generally speaking, the longer each fibre is (it’s staple length), the easier it is to spin into a yarn. Singles yarn, especially those with more twist tangle back on themselves, and do not usually make good knitting yarns. They are weaker, and will produce a knitted fabric that lies crooked (bias).

When a yarn is spun, the twist of the fibres can only go in one direction, either ‘S’ or ‘Z’ . ‘S’ is is when the yarn wraps like the central diagonal of the ‘S’ and ‘Z’ is the opposite direction, when the wrap follows the central line of the ‘Z’ opposite. On a drop spindle, ‘S’ is created by the spindle being spun anticlockwise, and ‘Z’ is produced when the spindle is spun clockwise. On a spinning wheel the direction is controlled by the direction of the wheel itself.

Plying is twisting two or more yarns together so that they make one, thicker yarn. It is done for various reasons; it will balance single spun yarns and prevent bias twist, it creates a thicker yarn, it adds strength to delicate yarns, and it combines different colours and textures for aesthetic results and can be used to produce a combination of these results.

When yarns are plyed, they should be twisted together in the opposite direction from their original direction of spin, e.g. two ‘S’ spun yarns would be plyed in the ‘Z’ direction.

You can ply your own single spun yarn or make thicker and decorative yarn by plying commercial yarns together.

Decorative effects to try: threading beads/sequins onto one strand, using a fancy and plain yarn, twisting singles and then twisting them again with commercial yarns in the opposite direction to the first twist (cable plying).

Method 1: When plying the same yarn together. Wind a centre pull ball using a ball winder and taking the yarn from both centre and outside ball, ply them together on a spindle.

Method 2: When plying the same, or two different yarns together. Wind the two ends of singles (or commercial yarn) together into a double ended ball, tie the end to the spindle and off you go.

Method 3: Andean Plying. Can be used in either of the above situations.

 Step 1: Hold your left palm facing you with the fingers splayed.

Step 2: With your right hand, take the end of the yarn, and tuck it into your watch band, sleeve, or hold it under your thumb. Do not lose this end!

Step 3: Take the yarn left around the the back of your wrist.

*Step 4: Bring it across the back of your wrist to the right side of your wrist

Step 5: Then take it left across your palm and around your middle finger from left to right.

Step 6: Next take it back around your wrist from right to left.

Step 7: Take the yarn to the right across your palm, and around your middle finger from right to left, then back to the left side of your wrist *

Repeat from * to *

Step 8: When all the yarn is wrapped around your hand, and making sure you don’t lose either end, slip the ring of yarn off your middle finger and twist the whole bracelet of yarn around your wrist so that this ring is on the back of your wrist.

If you need to take a break now, slip the main bracelet onto something like a toilet roll centre, being very careful to keep the ends visible.

Put the bracket back on your wrist. Once it is on your wrist keep your fingers splayed to prevent it slipping off whilst plying. Tie the two ends to the spindle or leader and start the spindle off. Use your fingers to feed the yarn evenly and control the amount of twist travelling up the yarns as you do when spinning.

 

This slideshow requires JavaScript.

4 ends of commercial yarn being plied using the Andean method. Finally it is wound into a hank. It could just be wound onto ball for knitting, but if a bit lively it may need to be hanked, steamed and hung before making into a ball.
This is a downloadable pdf of this page. Please note that you are welcome to print this for personal use, but it must not be  reproduced or distributed. Plying