Machine Knitting workshop, Brighton TAG

Today I ran a workshop that introduced members of Brighton Textile Art Group to machine knitting. To give a wider experience both a Knitmaster and a Brother machine were used, one standard and one chunky gauge. The chunky was particularly popular once it was found that it can knit handspun yarns.

Techniques explored included shaping, fair isle, single motif fair isle, knitwear (again great for hand spun), holding and short rows and simple, manual lace transfer.

I took along a little circular machine to demonstrate the difference between the two machine types, but the real interest was in the flat bed Japanese machines.

After the workshop response were really positive; people who had thought they would hate it had great fun, and those with machines were enthused to go home and get them out. Unfortunately the workshop clashed with the East Sussex Guild of Spinners, Weavers and Dyers meeting, so another workshop had been requested in the Spring or Summer of 2020.

Today is beanie day …

OK, I know it’s now mid January and this is a post about a Christmas gift but I’ve only just got around to finishing it off and getting it online. This is the story of knitting the hat worn in this photo.

December 2018…

I’ve started a beanie hat as a Christmas gift. Its in yarn from my stash, a rather nice airforce blue tweed 90% wool 10% acrylic blend Aran weight yarn. I dithered about the acrylic content I have to say, as I believe one’s toil is best rewarded by natural fibres, but the the colour (and having the yarn to hand), won the day.

The brim should work out to be around 7cm (3″) deep, and I’m going to knit it in a 3 row 2×2 cabled rib, with the shaped crown in stocking stitch. The pattern has been designed for a 61cm (24′) head circumference.

Gosh that doesn’t look very blue, more grey, must be the light. The rib shows though.

The cabled rib is worked on a 3.5mm circular needle, and the crown on a 4.5mm circular needle.

I have a set of those lovely interchangeable KnitPro needles, which means the world is my oyster when using circulars, but because the yarn is quite dark I have decided to use a white Prym triangular pointed circular so its easy to see the stitches. These are also comfortable to work with, and have a strange knob on the point that I quite like.

So far I have cast on 80sts (has to be divisible by 4 for the 4 stitch rib repeat) worked 2 rows rib and 6 repeats of the cable, and then 6 rows straight rib. I used the 2×2 alternate rib cast on recommended by Woolly Wormhead. Its not as stretchy as I had hoped, but looks good. Any stretchy one will do though, don’t beat yourself up about it.

How to work the c2b cable on the rib: Either use a cable needle, or work them as follows: slip the two knit stitches one-by-one knitwise, then insert the left needle from the right into the front of these stitches and slip them back to the left needle. This twists the stitches. Knit them one by one.

How I knitted the hat:

Cast on 80sts, using a stretchy cast on.

Join the round securely in your favourite way; for example work the first stitch, and pull the yarn to tighten the join before working the next stitch, or before working the first round slip the first stitch of the cast-on onto the point of the right needle so that it will be knitted at the end of the first round.

Mark the end of the round with a stitch marker.

Round 1 and 2: (k2, p2) to end.

Round 3: (c2b, p2) to end.

Repeat round 1-3, 5 times.

Round 16-20: (k2, p2) to end.

Round 21: purl.

Move the marker up to the current row.

Now you have the option to work all the stocking stitch in purl, and replace the knit decreases with purl versions, or if like me you find knit faster than purl, this is what I did.

Slip the last stitch to the left needle, and take the yarn to the back between the stitches then slip the stitch back so that the yarn is caught around the stitch. Invert the knitting and working in the opposite direction to former rounds, work the rest of the crown as knit stitches.

Round 22: knit

Continue working as Round 22 until the work measures 20.5cm from edge of rib.

Now to do the shaping.

I worked the first and every fourth round as a decrease round as follows.

First round,: k7, k2tog (70)

Second and third round: k all.

Fourth round: k6, k2tog (60)

Fifth and sixth round: k all.

Continue in this sequence, knitting one less stitch between decreases until 50 stitches on needle. Then work decreases on every second round until 20 stitches remain, finishing with a knit round.

Break yarn leaving a 40cm tail. Thread yarn onto a darning needle and slip the open stitches onto the darning needle. Draw the stitches in and secure the yarn end.

From fair-isle to football boots

This was a talk that I gave at the Textile Institute. In it I discussed seamless knitting technologies, their historical roots in hand knitting methods, and the potential the ‘new’ technolgies are bringing to commerical knitwear and knitted outputs. The audience had the opportunity to handle samples produced on flat-bed Shima Seiki Wholegarment and Santoni circular seamless machinery.

This was in 2014, and since then mass produced knitted footwear of varying degrees of sophistication has become common on the high street (and it is so comfortable).

I recently purchased a pair of hi-top elastic knit trainers, with flechage (short row) shaping on the ankle and other technical knit structures on the upper and toe, for a very moderate sum. In 2014 they were still expensive and quite exclusive – so we can see the impact on footwear without looking further than the high street (or online shopping of course).

I recently heard of a business in the US that knits custom made climbing boot uppers, fascinating!

Follow this link to my media page to read more about the talk.