I have a Panasonic bridge camera, the Lumix FZ38, which is a great all round camera. I’ve used it for photographs for research and for my books, and it performs really well. However, once its on a tripod its a pain to remove the camera each time I want to see a large screen version of the photo to check colour, compostion, focus etc. The FZ38 won’t tether to my Windows laptop, and hasn’t got wifi to send the photos, so I either chance it that the small screen is showing me enough. In extreme cases where the camera is poised on the end of a boom and its hard to see the back screen, I just hope!
I was at the point of thinking of purchasing a new camera; and considering a DSLR with wifi and/or that would tether, when I came across wifi SD cards. I did a bit of reading around online and came to the conclusion that a Toshiba Flashair might work in my bridge camera. It will take SDHC cards, and that seemed to be the basic critera. If it worked, it would mean I could continue to use the camera that I know, and that isn’t too complicated, and takes a great picture that is perfect for my needs. So I ordered a 16gb Toshiba Flashair (version 4) and it arrived yesterday.
I couldn’t get to play with it until today, and it was a little un-nerving to start with, the instructions were OK, but didn’t tell you what you were trying to achieve, so it was a bit of a leap of faith. Fortunately my techie son was at hand to give me help when the PC failed to connect to the card. The reason for this turned out to be the a conflict between wifi and wired connections; I don’t have great wifi in my office, so use a wired ethernet connection. He discovered that I have to unplug the ethernet cable (or at least disconnect from ethernet connection) for the wifi to find the Flashair card – and as that worked I didn’t want him to spend ages trying to solve the problem. Someone may be able to tell me why? I just have to remember to disconnect from ethernet first before turning on wifi and connecting to the card.
For some reason the Flashair interface that should enable the easy drag and drop doesn’t seem to work, so he mapped the card as a drive, so it appears in Windows Explorer. This is better than the web browser interface as saving the photos is easier via Explorer.
So I have by Panasonic Lumix FZ38 sending pictures to my PC almost seamlessly. OK, the distance can’t be very far, a few feet is all, but thats fine for my uses. It means I don’t have to take the camera off the tripod to check my shots. Brilliant!!
Then next step is to install the Flashair app on my iPad and try viewing the photos on that as well, (I don’t necessarily want to save them on it). I can’t see it will be a problem, but just need to give myself a bit of time to sort this out.
I also want to test the card in my IXUS and see if it will work as well in that, wow this is so exciting!
The card cost under £30, so compared to updating my camera thats a good deal.
I think that because it makes a mini-network of its own, I could wifi pictures between the camera and laptop without being part of a wifi network as such – for example when out and about without a wifi signal – we shall see, that is something to experiment with later on.