Getting the Infinity scarf mentioned in my last post knitted involved a very pleasant hour knitting on the beach.
Today was the deadline for an Infinity Scarf pattern that I had been commissoned to write at short notice, you know the sort of thing that happens!
Anyway, as I’d only finished knitting it last night we had to do the photoshoot today, even though it was raining and grey. So we set off with a collection of coloured umberellas, plastic bags for camera stuff and my nifty, home made, shower-cap camera raincover! Luckily I had been clearing out the bathroom cupboard yesterday and unearthed a bundle of those freebie ones from hotels. I knew they would be useful some day. The other thing they are great for is proving bread, but I digress…
Finding a model at short notice was not easy, but my lovely friend Jo came up trumps, and offered to stand in the rain before shooting off to see her Mum.
It was fun anyway, because I love photoshoots; seeing your knit design come to life on a person is so rewarding.
As always there were loads and loads of shots to sift through, but it was well worth braving the rain for such a nice photo.
I will be releasing the pattern on this website once it has been published later on in the Autumn so do drop back if you would like to knit the scarf. There will be a page for the Infinity Scarf with the pattern, hints and tips on working the pattern, and tutorials for the various knitting techniques used. Techniques used in the pattern, including a great stretchy cast on, are also featured in my popular knitting ‘bible’, The Knitting Book.
Thanks once again to Jo for her stoicism and humour.
“This book needs to be on every machine knitter’s manuals shelf, in pride of place, no matter if you use Silver Reed or Brother!”
“Where was this book when I was desperately trying to learn how to design lace/translate lace cards between Brother and Silver Reed?!?!”
This book is absolutely essential equipment as far as I am concerned!
Buy it! Buy it NOW!
I can not say enough how much you need this book! How much I needed this book… now if I can just convince her to write one on Passap…
No! I have no affiliation with the author… I wish I could say I know her.’
I found this when clearing out my studio. Was this really in 1988? How time flies…
About ‘Translating Between Hand and Machine Knitting’.
‘An outstanding read’
‘Here’s a new hardback book that’s packed with all the information a machine or hand knitter would wish to find.’
‘You’ll have no regrets, as this will be your best ever buy as a machine or hand knitter.’(Guild of Machine Knitters newsletter February 2019)
‘Vikki Haffenden outlines the necessary knowledge, especially of stitch construction – the basic necessity for knitting by all methods’.
‘Throughout the book the author uses very clear diagrams and photographs to explain stitch patterns, techniques and equipment’.
(Annec Cartwright in Slipknot, newsletter of the Knitting and Crochet Guild, June 2019)
‘I cannot tell you how much I adore this book’
‘Thanks to your work my eyes are open to the possibiliites of working on fresh and modern projects without having a background in fashion or textiles’
(Turtlemelon crafts, via Instagram)
OK, I know it’s now mid January and this is a post about a Christmas gift but I’ve only just got around to finishing it off and getting it online. This is the story of knitting the hat worn in this photo.
I’ve started a beanie hat as a Christmas gift. Its in yarn from my stash, a rather nice airforce blue tweed 90% wool 10% acrylic blend Aran weight yarn. I dithered about the acrylic content I have to say, as I believe one’s toil is best rewarded by natural fibres, but the the colour (and having the yarn to hand), won the day.
The brim should work out to be around 7cm (3″) deep, and I’m going to knit it in a 3 row 2×2 cabled rib, with the shaped crown in stocking stitch. The pattern has been designed for a 61cm (24′) head circumference.
Gosh that doesn’t look very blue, more grey, must be the light. The rib shows though.
The cabled rib is worked on a 3.5mm circular needle, and the crown on a 4.5mm circular needle.
I have a set of those lovely interchangeable KnitPro needles, which means the world is my oyster when using circulars, but because the yarn is quite dark I have decided to use a white Prym triangular pointed circular so its easy to see the stitches. These are also comfortable to work with, and have a strange knob on the point that I quite like.
So far I have cast on 80sts (has to be divisible by 4 for the 4 stitch rib repeat) worked 2 rows rib and 6 repeats of the cable, and then 6 rows straight rib. I used the 2×2 alternate rib cast on recommended by Woolly Wormhead. Its not as stretchy as I had hoped, but looks good. Any stretchy one will do though, don’t beat yourself up about it.
How to work the c2b cable on the rib: Either use a cable needle, or work them as follows: slip the two knit stitches one-by-one knitwise, then insert the left needle from the right into the front of these stitches and slip them back to the left needle. This twists the stitches. Knit them one by one.
How I knitted the hat:
Cast on 80sts, using a stretchy cast on.
Join the round securely in your favourite way; for example work the first stitch, and pull the yarn to tighten the join before working the next stitch, or before working the first round slip the first stitch of the cast-on onto the point of the right needle so that it will be knitted at the end of the first round.
Mark the end of the round with a stitch marker.
Round 1 and 2: (k2, p2) to end.
Round 3: (c2b, p2) to end.
Repeat round 1-3, 5 times.
Round 16-20: (k2, p2) to end.
Round 21: purl.
Move the marker up to the current row.
Now you have the option to work all the stocking stitch in purl, and replace the knit decreases with purl versions, or if like me you find knit faster than purl, this is what I did.
Slip the last stitch to the left needle, and take the yarn to the back between the stitches then slip the stitch back so that the yarn is caught around the stitch. Invert the knitting and working in the opposite direction to former rounds, work the rest of the crown as knit stitches.
Round 22: knit
Continue working as Round 22 until the work measures 20.5cm from edge of rib.
Now to do the shaping.
I worked the first and every fourth round as a decrease round as follows.
First round,: k7, k2tog (70)
Second and third round: k all.
Fourth round: k6, k2tog (60)
Fifth and sixth round: k all.
Continue in this sequence, knitting one less stitch between decreases until 50 stitches on needle. Then work decreases on every second round until 20 stitches remain, finishing with a knit round.
Break yarn leaving a 40cm tail. Thread yarn onto a darning needle and slip the open stitches onto the darning needle. Draw the stitches in and secure the yarn end.
Lace knitting – see more about this on my Translating Between Hand and Machine Knitting page, but in brief, yes this is explained in loads of detail, with helpful photos and diagrams, examples and step-by-step instructions.
The book does not include garment patterns, it explains how to knit different stitches by hand and machine, and why some stitches are more suitable for hand and others for machine knitting.
i have just received my pre-publication copy of ‘Translating between Hand and Machine Knitting’, it was waiting here on my arrival home from holiday. It’s a great welcome home present.
Here are some sample pages.
A pre-publication glimpse of my new book, Translating between Hand and Machine Knitting.
To be published by Crowood Press in summer 2018, this book is lavishly illustrated with clear step-by-step instructions on knitting techniques, stitch structures and fabric constructions.
Unlike many other knitting books, this one explains why knit stitches behave in certain ways, and how to achieve effects using combinations of stitches. Each stitch construction is analysed and explained with diagrams and examples, for example tuck stitch (in hand knitting this is known as broiche stitch) is clearly illustrated so that the route of the yarn is tracked, and effects on vertically and horizontally adjoining stitches can be seen. Fabrics made with this stitch in both hand and machine knitting are illustrated, explained and compared and contrasted in both methods of knitting. The most suitable method is highlighted and pros and cons of methods discussed.
The constructions of textural and colour effects are explored and described by hand and machine knitting methods. There is a whole chapter explaining how to knit a hand knitting garment pattern on a machine, or vice versa, and how to subsitute yarns between both methods. Examples and illustrations support every step, and shortcuts and hints and tips are scattered strategically throughout the text.
I am proud to say that my book has been written with the primary aim to enable the reader to take control of their knitting and create exactly what they want in both knitted textiles and knitted garment shapes.
It will take pride of place on any knitter’s book shelf, sitting next to The Knitting Book and Knit Step-by-Step. Preorder on Amazon
Correction to ‘Felted Tote Bag’ in The Knitting Book p 350-351. Corrections in bold and italics.
Cast on 50sts.
Starting with a k row, and working in st st, inc at both eds on 5th row. Work 10 rows without shaping. (52sts).
Row 16 (WS): Inc in first st. p15, cast off 20sts. p15 inc in last st. (54sts)
Carry on as pattern is printed.
Apologies – just have to remember that those wonderful pattern checkers are not infallible. It’s all in the numbers…